PDA

View Full Version : 97 M750 foot pegs...will they fit on an S2R 1K



Sieg
06-05-2007, 09:18 PM
Are the mounts and bosses the same? Need to know for a custom application.

Thanks,

Sieg

router.exe
06-05-2007, 09:33 PM
Are the mounts and bosses the same? Need to know for a custom application.

Thanks,

Sieg
you talkin about the full rearset or just the peg?

if the rearset then no, if the peg, i'm sure it's possible

Dave R
06-05-2007, 09:34 PM
nope
The 97 M750 ones are the width of ST pegs.. don't have measurements here but I can take some tomorrow. Newer rubber coated M pegs are the same as yours I believe.

Sieg
06-05-2007, 10:21 PM
nope
The 97 M750 ones are the width of ST pegs.. don't have measurements here but I can take some tomorrow. Newer rubber coated M pegs are the same as yours I believe.Dave - Measurements would be very helpful, here's why I ask:
http://www.ducatimonster.org/smf/index.php?topic=82682.0
Offer is over and the thread is locked now, sorry.
If the M750's peg mount is marginally narrower, do you think I could sucessfully shim them to fit the S2R? My S2R measures 21.32 mm inside mount width.

Thanks,
Sieg

Sieg
06-07-2007, 07:35 PM
Further proof that people in Eugene get no respect...................:mock:

Dave R
06-07-2007, 08:18 PM
oops, i forgot to get out the measurement stick :o

will do tomorrow

Sieg
06-07-2007, 08:26 PM
oops, i forgot to get out the measurement stick :o

will do tomorrow
Dave,

Please understand I'm just teasing..............since I don't have the pleasure of harassing you in person at the shop :happy57: No rush - at all.